Working principle and process of metal shredder

2021-08-08 11:01:41

Metal shredder is a new type of powerful material crushing device with low rotation speed and large torque. It can easily realize the processing of various materials through the shearing and tearing function of the main shaft. Scrap hammer shredder the coarse crushed materials greatly reduce the transportation cost, and facilitate the fine separation of subsequent materials. Scrap metal shredder It is a new type of material crushing device for waste metal, waste aluminum alloy, rubber and other materials Broken bridge aluminum and other materials processing core equipment.

Metal shredder

What's the working principle and operation process of metal shredder?

1. All kinds of materials are sent into the shredding chamber of the metal shredder by the feeding machine of the metal shredder for treatment. For some large volume materials, the grab bucket can also be used for feeding operation. The discharging of the feeding machine outlet directly tears the chamber of the metal shredder, and falls into the shredder under the action of gravity;

Metal tearing case

2. The structure of the shredding cutter shaft of the double shaft shredder is classified into front and rear two cutter shafts. The two cutter shafts rotate independently under the drive of the independent reducer. The roller shafts at both ends of the front and rear cutter rollers extend out of the two sides of the closed frame. One end of the driving roller shaft is connected with the hard tooth surface reducer through the coupling, and the power is provided by two independent motors to drive the equipment.

3. The two active shear roll shafts rotate in the opposite direction, and the front and rear shear rolls are respectively installed through the shaft sleeve and the cutter. The two cutter shafts realize the mutual engagement of the cutter teeth. When the equipment is running, the cutter claws on the cutter automatically squeeze and press the material on the rolling, and the coarse crushing effect of the material is realized under the joint shear action of the two cutter shafts.

4. After shearing and tearing, the materials are uniformly discharged through the collector at the bottom of the equipment, and then the materials are uniformly output by the conveyor belt for the next round of fine separation and crushing of materials.

Hubei Lidi Machine Tool Co., Ltd. was founded in 1969 and has gone through three stages of development. Currently, it belongs to Tianqi Group (stock code: 002009). The company is located in Yichang, Hubei. It is a national key high-tech enterprise with 8 service subsidiaries located in Tianjin, Tangshan, Wuxi, Changsha, Chengdu, Guangzhou, Xi'an and other places. The company has more than 300 employees, of which 40% have a college degree or above, 10% have a master's degree or above, and 20% are professional and technical R&D personnel.

The company has long focused on the research, development, manufacturing and sales of environmental protection equipment manufacturing, and is committed to becoming the world's leading resource recovery and recycling system solution and complete set of equipment integrated service providers. The business covers five major sectors: scrap steel processing, scrap car dismantling, non-ferrous metal processing and sorting, comprehensive utilization of renewable resources, energy conservation and environmental protection, involving important industries such as steel, automobiles, non-ferrous metals, resource recycling, environmental protection, and many well-known domestic and foreign companies Formed a strategic partnership and enjoys a high reputation in the industry. Hubei Lidi’s core sales equipment include: ELV car dismantling, end life of vehicle car dismantling, Scrap metal shredder, Scrap hammer shredder, Scrap metal shear, Scrap metal baler, Scrap metal pre-shredder, non ferrous sorting, Hubei Lidi strives for Under the guidance of the national "One Belt One Road" strategy, we will expand friendly cooperation globally, enhance exchanges, and discuss the "green development" plan.

In the future, Hubei Lidi will, under the leadership of a team with General Manager Li Mingbo as the core, take the path of joint, cross-border, and innovative international development. As always, we are committed to the implementation of complete sets of environmental protection equipment, intelligence, refinement, informatization, and harmless environmental protection, to promote the development and upgrading of the environmental protection equipment industry, and make unremitting efforts to build a "beautiful China" and achieve a sustainable future struggle.